Handheld Copper Wire Stripper Tool using Stock Blade, Cable Stripping Machine for Scrap Copper Recycling
5 sold in last 24 hours
- Uses Low-Cost Blades Available from Your Local Hardware Store
- Small Size Fits in Pocket
- Strips from 24 AWG (3/64") to 0 AWG (7/16") Solid or Stranded
- Not recommended for wires with thick insulation or rigid solid copper. Please see our other machine models with higher efficiency.
- What You Will Receive: One (1) Handheld Stripper with One (1) Premium Blade Installed
Tags |
Estimated shipping
Select a product to estimate shipping.CopperMine Model 102 Versatile Handheld Wire Stripping Machine Exclusive New Features (US and Foreign Granted and Pending Utility Patents): CopperMine's NEW Model 102 design provides customers with a more economical copper wire stripping machine that can process a wider variety of wires. This handheld model provides scrappers or hobbyists just starting out with the essential tools they need to process wires .24 AWG (3/64") and up, either solid or stranded. If your wire can be stripped using a utility knife without much difficulty, this machine will really speed up your process. Note: the above range of wire gauges are for typical wire products. Due to the variety of wire structures actual range may vary. Refer to our instructions manual for more information on troubleshooting, how to set the machine up, and how to use the handheld wire stripper.
Specifications:
Good for most wires from 24 AWG (3/64") and up, either solid or stranded.
Great wire stripper for on-the-go users looking to strip small sections of scrap wire.
This machine may not be able to strip wires thicker than 10 AWG, especially with tougher insulation.
Product Size: 3-1/2" x 1-3/4" x 2"
How to Hold:
Hold the tool with your dominate hand.
Position the machine between your thumb and pointer finger.
Squeeze the stripper and let the blade tip enter the hole.
Set Cutting Depth:
Adjust the blade depth to an estimated level based on the wire you are stripping by turning the adjustment screw.
When adjusted properly there should be minimal pulling force and the blades should glide across the insulation.
For difficult wires the blade angle can be adjusted by slightly loosening the screw holding the blade, repositioning the blade, and tightening.
Wire Stripping:
Choose a hole on the wheel slightly larger than the wire.
Set the blade tip to the correct height.
Insert the wire about one inch past the wheel from the back of the machine.
Pull the wire through the front of the machine, keep pulling until the entire wire has passed the wheel.
Find the slit and pull the copper out of the insulation.
Product details
| Main Specification | |
|---|---|
| Spezifische Verwendungen für Produkte | DIY-Projekte or scraping copper wires or repairing electrical cables |
| Hersteller | CopperMine Tools |
| Stückzahl | 1 Zähler |
| Griffmaterial | Legierungsstahl |
| Schnittbreite | 11.13 millimeters |
| Marke | CopperMine |
| UPC | 726670220189 683405202066 |
| Anzahl der Positionen | 1 |
| Produktgrößen | 3.5"L x 1.75"W |
| Material | Legierungsstahl |
| Farbe | rot |
| Griffart | Ergonomie |
| Positionsgewicht | 5 Unzen |
| Product information | |
| Anzahl der Packungen | 1 |
| Set Name | 1 |
| Technical Details | |
| Nummer des Herstellers | 101 |
| Materialtyp | Legierungsstahl |
| Item details | |
| Modellnummer | 101 |
| Others | |
| Produkttyp | Drahtabstreifer |
| Positionsabmessungen L x W | 3.5"L x 1.75"W |