AUCO A001N Durable Right Angle Drill Attachment, Adjustable Drill Adapter
11 sold in last 24 hours
- Compact design for driving screws and drilling holes in tight work areas and reaching the places that wouldn't normally be able to reach
- Compatible with a wide variety of 1/4 inch HEX Shank Accessories. It can works with cordless drill and impact driver up to 18 volts or Up to max.3000 RPM and can exert maximum torque of 500 in-lbs (56.5 Nm).
- All metal housing for ultimate durability. Constructed with steel gears and ball bearing drive for smooth drilling and long life.
- Support arm provides security and a comfortable grip. It can help you save time and get the job done faster.
- Good flexibility - Support with 360° collar rotation and 150° suppore arm rotation
Tags |
Estimated shipping
Select a product to estimate shipping.Key Features
Applicability
2-inch front-to-back design
Compact design for driving screws and drilling holes in tight, difficult work areas
Durability
All metal housing for maximum durability
The support arm provides security and a comfortable grip. It can help you save time and get the job done easier.
Nice Torque
Up to max. 3000 RPM and 500 in-lbs (56.5 Nm) of torque.
For use with cordless drill and impact driver up to 18 volts.
Good Flexibility
360° Collar Rotation
150° Support Arm Rotation
The support arm can be adjusted to 40 positions ( 8 positions around the head of right angle drill attachment, each has 5 side angle positions).
High Compatibility
Compatible with a wide variety of 1/4 inch HEX Shank Accessories
Drill Bits
Spade Bits
Nut Drivers
Drill Chucks
Before Use
Note:
When adjusting the position of the support arm, align the edge of right angle drill attachment head with the edge of the adjustment collar. Otherwise, the support arm will be stuck. With drills up to 3,000 RPM, the support arm can be adjusted to 40 positions ( 8 positions around the head of right angle drill attachment, each has 5 side angle positions).
Warning:
To reduce the risk of injury, the support arm must be securely tightened in the detent position. Otherwise, the adjustment collar would rotate when used.
The angle attachment is for use with cordless drills and impact drivers up to 18 volts. Never use the attachment with impacting tool or corded tool.
How to use
Inserting Bits
1. Insert the bit shank into the chuck.
2. Pull on the bit to make sure it is secure.
3. Pull down the chuck collar and release the bit shank.
Operation:
Make necessary adjustments to support arm. Hold the power tool securely to control the torque reaction. Place the bit against the workpiece, maintaining 90°angle between the right angle drill attachment and the workpiece. Start the tool slowly, gradually increasing speed.
To provide maximum control, please adjust the support arm before using it. Never use the right angle drill attachment with the support arm loose.
Hold the tool securely and tightly when drilling/driving to control the torque reaction. Be careful that high torque situation may cause the tool to spin, causing loss of control.
Product details
| Main Specification | |
|---|---|
| Kompatible Geräte | Cordless Drill or Impact Driver |
| Hersteller | Sharpal Inc. |
| Stückzahl | 1 Zähler |
| Höchstdrehzahl | 3000 U/min |
| Stromstärke | 18 A |
| Marke | AUCO |
| Anzahl der Geschwindigkeiten | 1 |
| UPC | 814744025010 |
| Anzahl der Positionen | 1 |
| Eingeschlossene Bestandteile | Bohranlage |
| Spannung | 18 |
| Farbe | Silber |
| Positionsgewicht | 0,38 kg |
| Product information | |
| Drehzahl | 3000 Rpm |
| Technical Details | |
| Nummer des Herstellers | A001N |
| Maximale Chuckgröße | 0.25 Inches |
| Maximales Drehmoment | 500 in-lb |
| Bohrertyp | Schlagantrieb |
| Drehmoment | 500 in-lb |
| Item details | |
| Modellnummer | A001N |
| Features & Specs | |
| Zusätzliche Merkmale | Kompakt |
| Others | |
| Item Highlight | Impact Fit or Max Torque 500 in-lbs (56.5 Nm) or All Metal Body & Steel Gear or For Use with Cordless Drill and Impact Driver |
| Produkttyp | Drill Adapters |