4x100 Wheel Spacers Fits Toyota & Mazda 3/8 inch 10mm 54.1mm With Lip 2PC
9 sold in last 24 hours
- [VEHICLE FITMENT] Fits Toyota Celica 1985-1991, Corolla 1987-2002, Echo 2000-2005, MR2 1985-1989, MR2 Spyder 2000-2005, Paseo 1992-1999, Prius 2001-2003, Prius C 2012-2019, Tercel 1981-1999, Yaris 2006-2020, Yaris iA 2017-2018; Mazda 2 2011-2014, 323 1990-1995, MX-3 1992-1996, MX-5 Miata 2016-2026, Miata 1990-1997 and 1999-2005, Protege 1990-2003. For 4x100 hubs with 54.1mm bore and M12x1.5 studs. Each spacer moves the wheel outward 10mm per side. Verify year/submodel in fitment.
- [PRODUCT SPECIFICATION] Includes 2 forged 6061-T6 slip-on spacers, each 10mm thick, for 4x100 hubs with a 54.1mm center bore and anodized finish. The 54.1mm bore and integrated wheel-side hub lip support consistent wheel centering. Verify wheel bore, hub-lip engagement and available thread engagement before installation.
- [4-AXIS CNC PRECISION] Machined for consistent bolt-hole placement, uniform thickness and flat mounting faces. Precise dimensions support even seating when the hub and wheel mounting surfaces are clean, free of rust and fully flush.
- [SGS TESTED MATERIAL] Forged 6061-T6 aluminum combines strength, low weight and consistent material structure for dependable load support. The anodized finish helps resist oxidation, corrosion and surface wear. The aluminum material is SGS Tested.
- [CHECK THREAD ENGAGEMENT] Clean both mounting faces and confirm the spacer and wheel sit fully flush with no contact or gap. Verify sufficient thread engagement; extended studs may be required when engagement is insufficient. Correct any interference before driving, torque to the vehicle manufacturer's specification and recheck after 25-50 miles.
Estimated shipping
Select a product to estimate shipping.Do I need extended wheel studs with slip-on spacers?
These slip-on spacers do not include studs. Confirm at least 7–8 full turns of lug-nut engagement after installation. Extended studs may be required, especially for spacers thicker than 5mm
How do I choose the correct spacer thickness?
Measure the available fender, tire, suspension, and brake clearance before ordering. Each spacer moves the wheel outward by its stated thickness—3 mm, 5 mm, 7 mm, 10 mm, or 12 mm per side. Do not select the width based on appearance alone
Will these spacers fit if my vehicle has the same bolt pattern?
Not necessarily. The bolt pattern alone does not confirm fitment. Match the bolt pattern, hub bore, and exact vehicle year, make, and model. If extended studs are needed, their thread pitch must also match your vehicle
What can cause vibration after installation?
Common causes include uneven torque, debris, incorrect fitment, wheel imbalance, or worn suspension components—an often-overlooked issue. Confirm the spacer and wheel sit completely flush
Can I stack two thin spacers?
No. Do not stack wheel spacers. Stacking creates additional mounting surfaces and can prevent secure, flush seating. Use one spacer in the correct thickness for each wheel
Product details
| Main Specification | |
|---|---|
| Hersteller | Customadeonly |
| Marke | Customadeonly |
| Produktgrößen | 9.5 x 2 x 9 inches |
| Positionsgewicht | 1,5 Pfund |
| Product information | |
| Nummer des Modells | 400154110B-LIP |
| Technical Details | |
| Nummer des Herstellers | 400154110B-LIP |
| Others | |
| Datum der ersten Verfügbarkeit | 2019 or 19. Dezember |
| Produkttyp | Wheel Adapters & Spacers |