Fluke Networks MT-8200-60-KIT IntelliTone Pro 200 Probe and Toner, Multicolor
4 sold in last 24 hours
- IntelliTone digital toning eliminates noise and false signals
- SmartTone analog toning precisely isolates individual wire pairs
- Locates cables safely and effectively on active networks
- Verifies twisted pair installation with visual end to end continuity test
- Probe detects digital signal and 1 kilo hertz signal from the analog toner
- Probe has built in pair tester to identify open, shorted and crossed pairs
- Signal strength indicator LEDs so you can help identify 1 cable that is bundled with other cables
- Confirms cable location, verifies cable continuity, and detects cable faults (opens, shorts, and reversed pairs) in 1 step
Estimated shipping
Select a product to estimate shipping.Intellitone Pro 200 Lan Toner and Probe Kit. Operating temperature: 32 °F to 104 °F (0 °C to 40 °C),Storage temperature: -4 °F to +140°F (-20 °C to °C), Vibration: Random, 2 g, 5 Hz-500 Hz, Altitude: 3000 m, EMC: EN 61326-1, FCC Part 15 B, Control: Thumbwheel switch, Toner frequency: IntelliTone signal: Encoded digital signal, Analog SmartTone signal: 500 - 1200Hz, 4 songs.
Important information
Legal Disclaimer
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
IntelliTone Pro 200 LAN Toner and Probe Kit
We reliably equip professionals with certification, troubleshooting and installation tools to install and maintain critical network cabling infrastructure for our connected world.
Digital network cable toner and probe traces as well as locates cables on active network
Get advanced vision for locating cables more effectively at patch panels, switches, termination blocks, or hidden within bundles. The IntelliTone Pro 200 LAN Toner and Probe Series gives you superior vision for locating cables hidden in floors, ceilings, walls, and in bundles. Its breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks.
What's in the Box?
IntelliTone Pro 200 LAN Toner and Probe
Coax F connector adapter
(2) RJ11 and (2) RJ45 patch cables
Test leads with alligator clips
(2) Lanyards
Quick start guide
(2) 9-volt batteries
Locate and Isolate Cabling
Isolate Terminated Cables: IntelliTone Pro 200 LAN Toner uses the unique properties of twisted pair cabling to create a balanced signal that minimizes the effect of signal bleed. The smart digital signal processing clearly identifies this signal with audio and LED visual indicators, allowing you to rapidly isolate the correct cable from a bundle or on a patch panel. Eliminate hours of cable confusion—and get it right the first time.
Isolate Individual Wire Pairs: With traditional analog toners and probes, isolating individual wire pairs precisely can be almost impossible because of signal bleed between pairs. As a result, wire pairs are often routed and terminated incorrectly the first time. IntelliTone Pro’s SmartTone analog technology cuts out the guesswork and improves accuracy by providing definitive confirmation when the pair under test is located. Just short the pair under test, and the audible tone will change its cadence.
Verify Ethernet Service
Toning: Quickly locate the cable in the equipment closet when performing moves, adds and changes. Unconnected cable can be quickly isolated in the presence of bleed.
CABLEMAP capability: Like that of a cable tester, CABLEMAP identifies common cable miswires in twisted pair cabling. Complete per-pin verification of TIA568 wiring identifies the exact wire that is open, shorted or miswired. LED lights and distinctive tones in the cable tester clearly indicate miswires. The built-in feature eliminates the need to carry separate tools – an all-in-one tool to locate and map Category 5 cabling even when plugged into a switch, and verify link service after moves, adds and changes.
Verify Ethernet Service: Is the link pulse correct, reversed due to a swap cable of uplink port, or MDIX capable? Identify active Ethernet services present at the office wallplate. LED lights clearly indicate the presence of normal, reversed or MDIX Ethernet link connectivity.
Verify Cable Continuity
Eliminate callbacks during cabling moves, adds and changes with the powerful diagnostic capabilities of IntelliTone's cable tester. IntelliTone Pro 200 Probe features a Cablemap capability like that of a cable tester that identifies common cable miswires in twisted pair cabling. IntelliTone technology automates the testing of each conductor for end-to-end continuity; LED lights and tones clearly indicate miswires such as opens, shorts or reversed pairs.
Tone Live Networks
Modern network devices use aggressive termination schemes for cables connected to their ports. While this termination reduces noise and crosstalk in the cable, it can also absorb an analog toner signal, making the connected cable impossible to detect with an analog audio probe. The result is that locating an unlabeled network can take hours with analog technology. Unlike analog signals, the IntelliTone Pro 200 LAN digital signal stays strong despite common mode termination and IntelliTone Pro 200 LAN Toner automates toning individual cable conductors, making it quick, efficient and safe to locate cables on active networks.
Product details
| Main Specification | |
|---|---|
| Global Trade Identification Number | 00754082127444 or 08716065317534 |
| Hersteller | FLUKE NETWORKS |
| Stückzahl | 1 Zähler |
| Marke | Fluke Networks |
| UPC | 754082127444 637315454077 695973827015 781119445370 |
| Anzahl der Positionen | 1 |
| Eingeschlossene Bestandteile | Other Networking Devices |
| Stromquelle | Batteriebetrieben |
| Obere Temperaturklasse | 104 °F |
| Farbe | Gelb |
| Positionsgewicht | 1,1 Pfund |
| Technical Details | |
| Teilenummer | MT-8200-60-KIT |
| Modell | MT-8200-60-KIT |
| Messart | Electrical Measurement |
| Style | |
| Stilbezeichnung | LAN TONER AND PROBE KIT |
| Measurements | |
| Positionsmaße | 12.2 x 16.5 x 3.94 inches |
| Others | |
| Nummer des Teils | FL-MT-8200-60-KIT or FL-MT-8200-60A |
| Produkttyp | Network & Cable Testers |
| Mindestbetriebsspannung | 9 Volt |