PC Products PC-7 Epoxy Adhesive Paste, Two-Part Heavy Duty, 1 lb in Two Cans, Charcoal Gray 62774, (Pack of 2)
11 sold in last 24 hours
- Two-part multipurpose epoxy adhesive paste works as a bonding agent, sealant, and filler for a range of indoor and outdoor applications
- Bonds many materials, including fiberglass, wood, concrete, many metals, brick, glass, ceramic, and rubber
- Seals oil, gas, and water tank leaks, as well as plumbing and masonry cracks
- Fills holes, castings, and molds
- Application temperature range is 35 to 115 degrees F, and service temperature range is -20 to +200 degrees F
Estimated shipping
Select a product to estimate shipping.PC-7 is the tough job epoxy. This paste epoxy was formulated for maximum bonding power. When mixed, components A (grey) and B (black) reacts to form a bond of tremendous strength. PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes. High "wet grab" or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy without drip or sag. PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Approximately equal amounts of A and B by volume; variations of either component as high as 20 percent will not affect the bond strength. When desirable, one part of A to two parts B may be used to increase elasticity (expansion joints, etc. ). In cold or cool temperatures, place PC-7 container near heat prior to using. PC-7 mixes and spreads easier at 80 degree F than at 40 degree F. Any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-7. Use with as adhesive: wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations; as sealant: oil, gas, water tanks, cellar cracks, pressure tanks, and plumbing leaks; as a filler: holes, castings, patterns, molds, voids, welds, steering wheels and much more. Work time (70 degree F): 60 minutes. Tack free cure time: 160 minutes. Cure for service: 24 hours. Maximum cure: 7 day. Gardner impact resistance: 160 in. /Lb. Conduction (electric): non conductive. Excellent thermal shock. Non toxic once cured. Heat range: -20 to 200 degree F.
Product details
| Main Specification | |
|---|---|
| Kompatibles Material | Glas or Fiberglas or Keramik or Beton or Ziegel |
| Hersteller | Protective Coating Co. |
| Stückzahl | 16 Unze |
| Formblatt | Paste |
| Spezifische Verwendungen für Produkte | Reparatur |
| Zugfestigkeit | 2150 psi |
| Marke | PC Products |
| UPC | 054983162774 |
| Voll Cure Time | 24 Stunden |
| Wasserbeständigkeit | Wasserbeständig |
| Menge des Pakets | 1 |
| Eingeschlossene Bestandteile | (2) 1 lb PC-7 |
| Anzahl der Stücke | 2 |
| Material | Paste |
| Farbe | Kohlegrau |
| Besonderheit | High Wet Grab or Tack |
| Positionsgewicht | 16 Unzen |
| Product information | |
| Volumen | 1 Liters |
| Technical Details | |
| Teilenummer | 62774 |
| Modell | 62774 |
| Materialtyp | PASTE |
| Viskositätsgrad | hoch |
| Item details | |
| Name des Typs | PC-7 Epoxy Adhesive Paste or Two-Part Heavy Duty |
| Others | |
| Produkttyp | PC-7 Epoxy Adhesive Paste or Two-Part Heavy Duty |
| Weitere Besonderheiten des Produkts | High Wet Grab or Tack |
| Containertyp | 2 Cans |