3M Nitrile High Performance Plastic Adhesive 1099, Tan Color, 5 Oz Tube
12 sold in last 24 hours
- FOR INDUSTRIAL USE ONLY: This product is designed exclusively for industrial applications
- HIGH-PERFORMANCE ADHESION: Forms strong bonds on most vinyls and plastics
- HIGH-STRENGTH: Provides strong, quick-drying bonds at room temperature, with 40 minutes of working time
- TEMPERATURE-ACTIVATED BENEFITS: Optional heat curing increases bond strength
- APPLY YOUR WAY: Capable of being applied with industrial-grade spray equipment
- For industrial/occupational use only. Not for consumer sale or use
Tags |
Estimated shipping
Select a product to estimate shipping.3M Nitrile High Performance Plastic Adhesive 1099 dries quickly with an open time of approximately 40 minutes. Its assembled bonds are proven to be strong while resisting weathering as well as damage from water, oil and fuel. Additionally, it bonds well to plastics and vinyl, providing long-term adhesion as well as good resistance to plasticizer migration.
Important information
Legal Disclaimer
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.
Nitrile High Performance Plastic Adhesive 1099
Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.
Details:
High performance adhesive forms strong bonds on most vinyls and plastics
Resists weathering, water, oil, plasticizer migration and fuels
Provides strong, quick drying flexible bonds
Optional heat cure increases bond strength
Sprayable with industrial grade spray equipment
Ideal for Vinyl & Plastic
3M Nitrile High Performance Plastic Adhesive 1099 bonds to a variety of substrates – primarily leather and most vinyl sheeting as used in awnings, upholstery and faux leather – as well as plastics, for a strong, enduring bond. However, it may stain thin or light-colored vinyls.
Speed Up the Bonding Process
With 3M Nitrile High Performance Plastic Adhesive 1099 you can quickly meet the requirements of your bonding application. This fast drying adhesive forms a durable bond at room temperature, but also has optional heat-initiated chemical reaction to achieve even higher bond properties. Additionally, this adhesive is sprayable with industrial grade spray equipment, bringing convenience and consistency to large scale applications.
Applying Your Adhesive
Whether it is being sprayed, brushed or rolled on, the application of your 3M adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you’ve formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered.
Recommended Applications:
Bonding most vinyls and plastics (not recommended for polyolefin plastic bonding)
Aftermarket automotive repair, including panel installation and upholstery
Banners and awnings
General industrial
MRO
Product details
| Main Specification | |
|---|---|
| Kompatibles Material | Kunststoff or Vinylchlorid |
| Hersteller | 3M |
| Stückzahl | 1 Zähler |
| Formblatt | Flüssig |
| Spezifische Verwendungen für Produkte | Fleet and plant maintenance. |
| Marke | 3M |
| UPC | 021200198083 |
| Voll Cure Time | 0.67 hours |
| Wasserbeständigkeit | Wasserbeständig |
| Menge des Pakets | 1 |
| Eingeschlossene Bestandteile | Klebstoff |
| Anzahl der Stücke | 1 |
| Material | 3M |
| Farbe | Tan |
| Global Trade Identification Number | 00021200198083 |
| Besonderheit | Not_performance_used |
| Positionsgewicht | 5,28 Unzen |
| Product information | |
| Volumen | 5 fluid ounces |
| Technical Details | |
| Teilenummer | 021200198083 |
| Modell | 1099 |
| Materialtyp | 3M |
| Viskositätsgrad | Medium |
| Item details | |
| Name des Typs | 3M NITRILE HIGH PERFORMANCE PLASTIC ADHESIVE 1099 or TAN or 5 OZ TUBE or 36/CASE |
| Others | |
| Produkttyp | 3M NITRILE HIGH PERFORMANCE PLASTIC ADHESIVE 1099 or TAN or 5 OZ TUBE or 36/CASE |
| Weitere Besonderheiten des Produkts | Not Performance Used |
| Containertyp | Tube |