PSLER 36 PCS Reflective Stickers for Car Bike Helmet Mailbox Bag 3 Colors
15 sold in last 24 hours
- HIGH VISIBILITY TAPE FULL PRISM REFLECTIVE - The night reflective tape consists of numerous tiny prisms, large wide-angle reflection, close to 0 degrees of flat angle still has excellent reflective effect, better reflective performance. On the road, the night sticker improves recognition, reduces accidents, effectively protects people at intersections, turning safety
- PASTING OPERATION - Wipe, clean the spot you want to stick and dry it with a towel. Remove, peel off the back of the high reflective tape. Apply, align the sticker to the desired location and slowly apply from one side to the other. Press, press highly reflective tape for 10 seconds after applying
- MATERIAL- Reflective decals front made of reflective film, waterproof pit scratch wear-resistant, folding-resistant, can be easy to use for a long time. Self adhesive reflective tape back made of hot melt pressure sensitive adhesive, stick firmly, not easily fall off, not hurt the car paint
- SPECIFICATION - Night reflective tape size is 3x8cm, 1.18x3.15 inch. Available in 3 colours, yellow, silver and red reflective stickers. 12 sheets for each colour, 36 sheets in total. 36 pieces of night reflective tape are more, when you stick the wrong reflective sticker is not afraid to use enough. Small reflective stickers also weigh less and are lightweight
- USAGE - Waterproof reflective tape have many uses. Safety stickers are suitable for helmets, mailboxes, fences, backpacks, and clothing. Reflective stickers are also suitable for many vehicles. Such as cars, trucks, scooters, motorcycles, bicycles, trailers and golf carts, etc
Tags |
Estimated shipping
Select a product to estimate shipping.It may be that the surface of the object to be pasted is uneven/curved, so it doesn't take up firmly and cause it to fall off
Reflective sticker adhesion will decrease when the temperature drops in winter
Solution:
1. Paste flat objects
2. Heat the reflective sticker with a blower to increase the temperature and viscosity
If the above methods are still not sticky, you can apply for a new reflective sticker
Clean the spot you want to stick and dry it with a towel.
Peel off the back of the high reflective tape.
Align the sticker to the desired location and slowly apply from one side to the other.
Press highly reflective tape for 10 seconds after applying.
In a slightly dark environment, the reflection effect shown by the flash camera.
Can I reapply it after tearing it?
No. Find the right position before you stick it, and you can't stick it for the second time after it's torn off by mistake.
How about the sticking performance, will it hurt the car paint?
Reflective sticker backing for pressure-sensitive adhesive, sticking firmly without hurting the car paint. Paste 48 hours after not afraid of rain and high-pressure water gun rinse, 72 hours completely solid.
Why do I receive reflective stickers with white lines?
Due to the special nature of the production process of full-prism reflective film, large rolls of reflective film every 1.5 metres or so there will be a processing line. So buyers receive the product on the processing line is a normal phenomenon.
How to remove it if I don't want to use it?
If you want to tear it off after a long time of sticking, please use a hair dryer to heat it up and then slowly remove it. The residual glue can be wiped off with a rag dipped in alcohol and other volatile liquids, or removed with an adhesive remover
How to test the car reflector stickers? Test conditions must be in black dark environment
At a distance of 5 metres, a strong reflection can be seen by shining a light on the reflective sticker.
20 meters away, the reflective sticker was illuminated by the car's high beam, and strong reflections were visible in the cab.
Product details
| Main Specification | |
|---|---|
| Oberflächenempfehlung | Holz or Metall or Kunststoff or Glas or Fenster or Gewebe or Tuch |
| Material | Kunststoff or Klebstoff |
| Farbe | rot or Silber or Gelb |
| Hersteller | ST0465 |
| Stückzahl | 36 Zähler |
| Kompatibles Material | Kunststoff |
| Marke | PSLER |
| Anzahl der Positionen | 36 |
| Empfohlene Verwendungen für das Produkt | Bike |
| Wasserbeständigkeit | Wasserdicht |
| Technical Details | |
| Materialtyp | Kunststoff or Klebstoff |
| Teilenummer | ST0465 |
| Modell | ST0465 |
| Artikelbeständigkeit | Wasserbeständig |
| Klebstoffformat | REGELUNG |
| Adhäsive Seitenzahl | 1 |
| Klebestelle | Bicycle Exterior |
| Others | |
| Item Highlight | 1.2 x 3.15'' or Strong Peel-and-Stick Backing or Universal High Visibility Reflectors or Safety Reflective Strips or Waterproof Prism |
| Produkttyp | Safety Warning Tapes |
| Weitere Besonderheiten des Produkts | Wasserdicht |
| Größenbezeichnung | 3*8cm |
| Klebstoffmaterial | Hot Melt Pressure Sensitive Adhesive |