3-1/4" 240 Grit Siliziumkarbid TwistFlex Zylinder Hone für 3"- 3,27" Bohrungen
6 sold in last 24 hours
- Was ist inbegriffen: 1 pro Pro-Graad TwistFlex Größe: 3 1/4" 3,25" (83mm) Bohrungsdurchmesser, Arbeitslänge der Bürste 3,15", Shank Durchmesser 0,31", Gesamtlänge 13,5". für USE ON BORE DIAMETERS 3,00" - 3,27".
- The Pro-Graad TwistFlex 3 1/4 Cylinder Honing & Deburring Tool is manufactured oversized - ORDER BY THE BORE SIZE. Brush will be approximately ten percent oversized, but will easily conform and fit into the bore size diameter due to the flexibility of the honing tool stems.
- Pro-Graad TwistFlex Cylinder Honing & Deburring Tool brushes have round abrasive spheres fastened to ends of flexible stems, which produces pressure and finishing evenly and consistently. for Engine Cylinders, Brake Cylinders, Hydraulics and Valve Guides.
- The Pro-Graad TwistFlex Cylinder Honing & Deburring Tool can be run with hand tools, drill press, or CNC equipment. Apply a lubricant liberally such as a honing tool lubricant, 10-30 weight motor oil, or transmission fluid prior to using honing tool brush. Max RPM is 600, however optimum range is 300 - 500 RPM. Tip: If producing cross-hatching pattern, less is best - maximum of two passes should be done with brush within 20-45 seconds of total run time, averaging between 10-55 strokes.
- The 3.25 inch TwistFlex Cylinder Honing & Deburring Tool is self-centering, self-aligning and will conform to the bore diameter to provide consistent surface finishing, as well as deburring any cross-drilled holes. The brush is self-compensating to produce a consistent finish throughout the life of the tool.
Tags |
Estimated shipping
Select a product to estimate shipping.Pro-Graad TwistFlex Cylinder Honing & Deburring Tools are manufactured oversized - ORDER BY THE HOLE SIZE. The brush will be approximately ten percent oversized, but will easily conform and fit into the bore size diameter due to the flexibility of the tool stems. Surface finishing of the Pro-Graad TwistFlex Cylinder Honing & Deburring Tool allows for a proper ring, seal, and oil control. Pro-Graad TwistFlex Cylinder Honing & Deburring Tools produce a consistent cross-hatching pattern which is ideal to seat piston rings and retain oil for lubrication in combustion chambers. Due to the flexible nature of the Pro-Graad TwistFlex Cylinder Honing & Deburring Tool, it is self-centering, self-aligning, and self-compensating for wear, producing a consistent finish and performance throughout the life of the tool.
Product details
| Main Specification | |
|---|---|
| Kompatibles Material | Gusseisen or Milder Stahl or Edelstahl und andere weichere Eisenwerkstoffe |
| Empfohlene Verwendungen für das Produkt | Entbehrung or Endbearbeitung |
| Eingeschlossene Bestandteile | 1 jeder TwistFlex Zylinder Hone 3-1/4 or Siliciumcarbid or 240 Grit or 13.5 Länge |
| Hersteller | Pro-Graad |
| Stückzahl | 1 Zähler |
| Borstentyp | An flexiblen Stielen befestigte Schleifglocken |
| Gittertyp | 240 mm |
| Marke | Pro-Graad |
| Gittermaterial | Siliciumcarbid |
| UPC | 850050327059 |
| Anzahl der Positionen | 1 |
| Positionsdurchmesser | 3,25 Zoll |
| Produktgrößen | 13,5"L x 3,25" W |
| Anzahl der Stücke | 1 |
| Material | Siliciumcarbid |
| Product information | |
| Anzahl der Packungen | 1 |
| Technical Details | |
| Teilenummer | Siliciumcarbid |
| Modell | TwistFlex Zylinder Hone |
| Materialtyp | Siliciumcarbid |
| Gitternummer | 240 mm |
| Measurements | |
| Positionsmaße | 8 x 2,5 x 2,75 Zoll |
| Others | |
| Item Highlight | Flexibler Zylinderhon zum Honen or Entgraten und Schraffur auf Stahl or rostfrei or Gusseisen und Eisenmetalle |
| Produkttyp | Flex Honen |
| Positionsabmessungen L x W | 13,5"L x 3,25" W |
| Art des Gittermaterials | Siliciumcarbid |