Automatic Vacuum Switch, Ortis Dust Control Autoswitch for More Power Tools, Delay Vacuum On/Off to Prevent Circuit Overload and Tripping, Adjustable Actuation Threshold
3 sold in last 24 hours
- NEW GENERATION: Addition of two tool outlets, no need extra extension socket, avoid messy cords and save time; Three vacuum run modes can be switch freely: Auto, Off and On; The values are clearly displayed with LED indicators, each key for corresponding option, easier to check and set.
- CONFIGURABLE ACTUATION THRESHOLD: 30W/60W, you can select flexibly appropriate actuation threshold according to your actual condition. Prevent vacuum from running too long or being unable to shut off after tool has stopped.
- CONFIGURABLE SHUTOFF DELAY TIME: Automatically delays vacuum turn-off by an optional time 3s/7s/10s to continue clearing the remaining airborne debris after the tool has stopped, which reducing work area noise and improve work efficiency.
- TURN ON DELAY & SAFETY: Automatic delays 1s to turn on the vacuum when you start your tool, which avoids circuit overload or tripping. Adopting UL-certified American Standard 14AWG power cord which allowable passage with a large current more than 30A. Thick copper core, covered with PC+ABS V0 grade flame retardant material, less heat during use and extend service life.
- COMPATIBILITY: Supports a wide range of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Table Saws, Power Sanders, Routers, Joiners, Planers etc. Max motor rating should not exceed 120V/15A 50/60Hz, 1875W.
Estimated shipping
Select a product to estimate shipping.POWER TOOL OUTLET
Tool Outlet Connection: 2 or 3 prong plug.
Max motor rating should not exceed 120V/15A 50/60Hz, 1875W.
VACUUM OUTLET
Any standard shop type vacuum will run on the Ortis Auto switch.
Vacuum motor HP should not exceed 1875W.
Dust collector motor should be rated at 120V/15A and HP should not exceed 1875W.
Power Feeders can also be controlled.
Why the Ortis Automatic Vacuum Switch is Perfect for You
Two Power Tool Outlets
Addition of two tool outlets, then you can plug more than one tool. No need for extra extension socket, avoid messy cords and save time.
Three Vacuum Run Modes
Three modes of operation: Auto, Off, On, allows use in either Auto or Manual mode when you want the vacuum and accessories to function independently. In ON/OFF MODE, the vacuum is turned on or off all time.
Configurable Shutoff Delay Time
Automatically delays vacuum turn-off by an optional time 3s/7s/10s to continue clearing the remaining airborne debris after the tool has stopped, which reducing work area noise and improve work efficiency.
Configurable Actuation Threshold
Configurable actuation threshold: 30W/60W, to prevent vacuum from running too long or being unable to shut off.
Package Included:
●1x Automatic vacuum switch
●3x Mounting screws
●1x User manual
●1x Strong nano-markless hook
Product details
| Main Specification | |
|---|---|
| Spezifikation erfüllt | UL or Ip54 |
| Kontrolltyp | Auto or Off or On |
| Kompatible Geräte | Router or Table Saws or Power Sanders or Miter Saws or Joiners or Planers |
| Hersteller | ortis |
| Stückzahl | 1 Zähler |
| Kontrollmethode | Berührung |
| Kontaktmaterial | Kupfer |
| Kontaktart | Normalerweise offen |
| Aktuelles Rating | 15 A |
| Betriebsspannung | 120 Volt |
| Terminal | Schaufel |
| Schaltungstyp | 3-Wege |
| Aktuatortyp | Rotation |
| Marke | Ortis |
| Anzahl der Positionen | 1 |
| Betriebsart | ON-OFF |
| Wattzahl | 1875 Watts |
| Steckverbindertyp | Stecker |
| Montagetyp | Oberflächenmontage |
| Product information | |
| Schaltertyp | TRIAC |
| Technical Details | |
| Materialtyp | Kupfer or Acrylnitril Butadien-Styrol or Polycarbonat |
| Teilenummer | hvc-03 |
| Modell | DJS-JJ7340 |
| Internationale Schutzberechtigung | Ip54 |
| Anzahl der Positionen | 3 |
| Konnektivitätsprotokoll | X-10 |
| Measurements | |
| Positionsmaße | 2 x 1 x 1 inches |
| Others | |
| Produkttyp | Vacuum & Dust Collector Parts |